What colour LED are you seeing on your Piqo?
Red
If your LED is... | It means... | What to do |
Slow flash
 | Recording normally | Nothing - this is the normal driving state |
Fast flash
 | Recording a protected file | Nothing - the camera is saving an emergency clip so that it's not easily overwritten |
Red & Blue Dual flash
 | Crash detected | Check if you're okay. Emergency SOS may be activated |
Red & White Dual flash
 | Emergency SOS error |
|
Yellow
If your LED is.... | It means... | What to do |
Slow flash
 | Firmware update in progress | Do not unplug your camera or turn your vehicle ignition off; wait for it to finish |
Fast flash
| SD card is being formatted | Do not unplug your camera or turn your vehicle ignition off, wait for it to finish |
Orange
If your LED is... | It means... | What to do |
Solid
 | No SD card inserted | Insert a compatible SD card |
Fast flash
 | SD card error | Reformat the card using the Nextbase app |
Green
If your LED is... | It means... | What to do |
Slow flash
 | App is connected to your Dash Cam hotspot for file viewing and download | Access files using the Nextbase app |
Solid
 | Connected to PC | Ready to transfer files to your PC or Mac |
Dark blue
If your LED is... | It means... | What to do |
Slow flash
 | Bluetooth pairing in progress | Complete the pairing process in the Nextbase app |
Fast flash
 | Bluetooth pairing failed | Try pairing again |
Light blue
If your LED is... | It means... | What to do |
Solid
 | Camera is on but not recording | Unplug the camera, wait for 10 seconds, and plug it back in |
Fading in
 | Camera is powering on | Nothing - wait a moment |
Fading out
 | Camera shutting down safely | Nothing - wait a moment to safely shut down |
White
If your LED is... | It means... |
 Slow flash | Voice command recognised |
Purple
If your LED is... | It means... |
 Slow flash | Witness Mode Lite active. |