Skip to main content

Remove the Dash Cam From Its Holder - 380GWX and 380GW Dash Cam

This article explains how to remove your 380GWX or 380GW Dash Cam from its holder and how to insert it back into the holder.

When this applies

Use this article when removing or reinserting a 380GWX or 380GW Dash Cam from its holder.

Before removing the Dash Cam from its holder, ensure any necessary cables have been removed.

Process / information

Remove the Dash Cam from its holder

  1. Place your hand over the front of the Dash Cam.

  2. Slide the Dash Cam towards you.

  3. The Dash Cam will now be removed from its holder.

Remove the Dash Cam from its holder

Insert the Dash Cam back into its holder

  1. Line up the Dash Cam with the clips on the 380 holder.

  2. Slide the Dash Cam towards the windscreen so it fits into place.

Insert the Dash Cam back into its holder

What to expect

The Dash Cam should slide away from the holder when being removed and fit back into the holder when reinserted.

Still need help?

Check that the Dash Cam is correctly lined up with the clips on the 380 holder.

Related Articles
Did this answer your question?