Get Started
Clean the area → Use the cleaning pack provided in the box to clear a suitable space behind your rear view mirror.
Prepare the mount → Peel off the red 3M tape from the Piqo mount.
Attach to windscreen → Firmly press the Piqo onto the glass.
Check the angle → Open Setup View in the Nextbase app to make sure your Piqo is positioned correctly for the best viewing angle.
Extra tips
Ensure glass is completely dry and dust-free before mounting.
Press and hold for 30 seconds for maximum adhesion.
Avoid repositioning frequently to maintain strong bond.
Troubleshooting
If your camera is not sticking to the winscreen, check that you used the cleaning wipe and allowed the glass to dry fully, then press and hold the mount in place for at least 30 seconds.
If your mount is coming loose over time, make sure the glass is not cold or damp, avoid mounting over dotted or uneven areas, and consider moving slightly lower on the screen to a smoother surface.
If the view is too high or blocker, open Setup View in the Nextbase app and gently rotate or adjust the Piqo until the road ahead fills most of the frame without cutting off too much sky or dashboard.
If your adhesive pad has been removed or damaged, you will need a new adhesive pad that is compatible with your Piqo mount before remounting.