Firmware updates are essential for ensuring your Nextbase PiQO dash cam operates with the latest features and fixes. Follow this step-by-step guide to manually update the firmware using an SD card and a computer.
Step-by-Step Guide
1. Download the Firmware
Visit the official Nextbase support page and locate the firmware download section for your specific PiQO model.
Download the latest firmware file to your computer. Ensure you download the correct file for your dash cam model.
2. Prepare the SD Card
Insert the SD card into your computer using an SD card reader.
Back up any important recordings or files stored on the SD card.
Format the SD card: - Use FAT32 for cards up to 32GB. - Use exFAT for cards larger than 32GB. - On Windows: Right-click the SD card in File Explorer and select "Format." - On Mac: Use Finder to locate and format the SD card. Avoid selecting "Quick Format."
3. Transfer the Firmware File
Extract the downloaded ZIP file (if applicable) to access the firmware file (usually a .bin file).
Copy the firmware file to the root directory of the SD card (not inside any folder). Do not rename the file.
4. Update the Dash Cam
Safely eject the SD card from your computer and insert it into the powered-off dash cam.
Connect the dash cam to a power source and turn it on. The update process should start automatically.
Do not remove the SD card or disconnect power during the update. The dash cam may restart automatically once the update is complete.
5. Finalise the Update
After the update, format the SD card again using the dash cam’s settings to prepare it for regular use.
For optimal performance, format the SD card every 2–3 weeks.
Troubleshooting Tips
If the update does not start automatically, reformat the SD card and repeat the process. Ensure the firmware file is correctly placed in the root directory.
By following these steps, you can ensure your Nextbase PiQO dash cam is updated with the latest firmware, enhancing its performance and reliability.