What do the icons mean?
The screen facing into the cabin will show icons. The below picture shows where the screen is located with the default "iQ" logo.
iQ Icons
| Power On Screen | |
|
QR Code - Link to your iQ using QR Code. To scan this you must use the Nextbase iQ app. |
|
| iQ preparing for Setup | |
| iQ Setup in Progress | |
| iQ Update in Progress | |
|
Action successfully completed Setup, Update etc. |
|
|
Loop Recording in progress Seen in normal driving mode. |
|
|
Footage Protected |
|
| Power Off Screen | |
|
Witness Mode Active Activated by voice "Hey Dashcam start witness mode" Turn off with "Hey Dashcam stop witness mode" |
|
|
Smart Sense Parking Active iQ will detect movement and record when needed |
|
| Loop Recording with Privacy Mode Active | |
| Loop Recording with Live View Active | |
| Formatting SD Card | |
| Siren Activated Through App | |
| Motion Detected | |
| Impact / Vehicle Movement Detected | |
| Emergency SOS Mode Activated | |
| Emergency SOS Error | |
|
|
Emergency SOS Countdown from 110 to 0 |
|
|
Emergency SOS Message Sent / Failed - In the event of failure your iQ must be reset |
| iQ connected to mobile phone using Bluetooth | |
| Remote Cloud Transfer | |
|
|
Voice Command Processing / Not Recognised |
| Low Vehicle Voltage | |
|
|
Error States - Replace SD Card / SD Card not detected / General Error |
| |
Signal Strength - No Signal / Weak / Medium / Strong |
| No GPS Signal |